Previous Next
Ultrasonic Flaw Detection

Of all the applications of industrial ultrasonic testing, flaw detection is the oldest and the most common. Since the 1940s, the laws of physics that govern the propagation of sound waves through solid materials have been used to detect hidden cracks, voids, porosity, and other internal discontinuities in metals, composites, plastics, and ceramics. High frequency sound waves reflect from flaws in predictable ways, producing distinctive echo patte...

Read more
Ultrasonic Thickness Gauging

Ultrasonic Thickness Gauging is a widely used nondestructive test technique for measuring the thickness of a material from one side. The first commercial ultrasonic gages, using principles derived from sonar, were introduced in the late 1940s. Small, portable instruments optimized for a wide variety of test applications became common in the 1970s. Later advances in microprocessor technology led to new levels of performance in today's sophisticate...

Read more
Radiographic Inspection

Radiographic inspection is a nondestructive testing technique used to evaluate objects and components for signs of flaws which could interfere with their function. It is accomplished with the use of radiographs, images generated by bombarding the object under inspection with radiation. X-ray and gamma ray radiographic inspection are the two most common forms of this inspection technique. Materials testing companies often offer radiographic inspec...

Read more
Magnetic Particle Testing

Magnetic particle inspection (MPI) is a non-destructive testing (NDT) process for detecting surface and slightly subsurface discontinuities in ferroelectric materials such as iron, nickel, cobalt, and some of their alloys. The process puts a magnetic field into the part. The piece can be magnetized by direct or indirect magnetization. Direct magnetization occurs when the electric current is passed through the test object and a magnetic field is f...

Read more
Liquid Penetrant Testing

Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, although for ferrous components magnetic-particle inspection is often used instead for its subsurface detection ...

Read more
Hardness Testing

The Metals Handbook defines hardness as "Resistance of metal to plastic deformation, usually by indentation. However, the term may also refer to stiffness or temper, or to resistance to scratching, abrasion, or cutting. It is the property of a metal, which gives it the ability to resist being permanently, deformed (bent, broken, or have its shape changed), when a load is applied. The greater the hardness of the metal, the greater resistance it ha...

Read more
Positive Material Identification (PMI)

Positive Material Identification (PMI) is the analysis of a metallic alloy to establish composition by reading the quantities by percentage of its constituent elements. Typical methods for PMI include X-ray fluorescence (XRF) and optical emission spectrometry (OES).

Read more
Eddy Current Testing

Eddy-current testing uses electromagnetic induction to detect flaws in conductive materials. There are several limitations, among them: only conductive materials can be tested, the surface of the material must be accessible, the finish of the material may cause bad readings, the depth of penetration into the material is limited by the materials' conductivity, and flaws that lie parallel to the probe may be undetectable. In a standard eddy curren...

Read more

Welcome To Our Site

We are an established Engineering / Inspection Company group based in Batam –Indonesia. We offer wide range of services to a board spectrum. Our Company rating is awarded with 3 (three) stars by Indonesian Oil& Gas Agency (MIGAS) We are license of company products by Indonesian Oil& Gas Agency (MIGAS) We are register and recommended by Indonesian Oil& Gas Agency (MIGAS) We are a member of association of Indonesian Technical Inspection Agency (APITINDO) Our Company has approved by Indonesian Law& Human Right Ministry We are a member chamber of Commerce& Industry Our Company has been managed by managing board consisting board of directory, Manager, Quality Manager and Operation Manager We has a supporting of work force with skilled employees and solid team work Our Company Certified in Quality Management System “ NDT Inspection Services” ISO 9001: 2008 By TUV Rheinland Our Company Certified& Approved For DNV Program 402B Our Company Certified& Approved For ISO 17020: 1999 by KAN (Komite Akreditasi Nasional) Certificate No. LI-043-IDN

Latest News

  • Sample News 2
    Written by Incarez on Friday, 20 July 2012
    Sample News 2 We are an established Engineering / Inspection Company group based in Batam –Indonesia. We offer wide range of services to a board spectrum. Our Company rating is awarded with 3 (three) stars by Indonesian Oil& Gas Agency (MIGAS) We are license of company products by Indonesian Oil& Gas Agency (MIGAS)…

Our Address

Head Office

Complex Golden Gate Block B No. 3A
Tanjung Uma, Batam 29444
Kepulauan Riau, Indonesia

Phone: +62 778 - 451 874
Fax: +62 778 - 451 957


Branch Office

Taman Cilegon Indah, Blok H4/15
Sukma Jaya Jombang, Cilegon 42421
Banten, Indonesia

Phone: +62 254 - 387 332
Fax: +62 254 - 387 332